SPECIFICATIONS

Brand Name: Bornwin

Choice: yes

High-concerned chemical: None

Material: Plastic

Origin: Mainland China

Shell Material: Plastic

Viewing Angle : 170°

Wire or Wireless: Wire

Note: After installing the camera, you need to set the car's infotainment system's reversing camera to "NTSC" mode; otherwise, it will not function properly, as shown in the video below.

Feature:

Using the south Korean PC3030 chip

Effective Pixels: PAL 512(H)X582(V); NTSC 512(H)X492(V)

Horizontal Resolution: 420 TVL

Minimum Illumination: 0.1Lux

Lens: 1.9mm

Lens Angle: 170 degree

Synchronization: Internal synchronization

Signal to noise ratio: >48db

Signal System: PAL / NTSC

Electronic Shutter: Auto

Video Output: RCA interface, 1.0Vp-p, 75Ohm

White Balance: Auto

Backlight Compensation: Auto

Power: DC 12V

Current Consumption: 50-60mA, Max 130mA with IR on

Operating Temperature: -20~+60, RH95% Max

Storage Temperature: -30~ +80, RH95% Max

Video cable length: 6m

Power supply cable length: 1.5m

2.4g Transmitter and Receiver:

100% brand new,High quality

Easy installation

Take one minute get your camera become a wireless camera

Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)

Work Range:Up to about 80m(Hollowness)

Connects to rear-view camera and front video screen

Power: DC 12V

Transmitter/Receiver Cable Length:1.5m

Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit.

Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end.

The transmitter also includes a handy pass through for the power so you can connect it inline with your camera.

Wireless transmitter with male phono plug and male 2.5mm power plug for supplying power to the camera.

Package Content:

1 x Car Rear View Camera

1 x video cable

1 x power cable

Notes:

1. Due to factors such as monitor brightness and light brightness, the actual color of the item may be slightly different from the image displayed on the website.

2. Manual measurement data may have slight deviations.